Yongnuo RF-603 Transceivers use the male PC plug, plug the 3.5mm to most strobes. 10ft length
*Each RF-603 is designed to work as trigger and as receiver.
*The unit automatically detects the mode it should work in. You have the full flexibility out of your gear.
*As a receiver it fires off-camera flashes which are placed on the hot shoe of the transceiver.
*Wake up function: Mount the transmitter into hot shoe of the camera, connect the receiver with the flash, press half-way the shutter button to wake up the flash at the same time, the green signal light will be bright for some seconds and then press shutter button completely to fire the flash. This "Wake up" function is only supported for flashes which have a sleep mode.
*As a trigger the RF-603 can be placed in the cameras hot shoe or if you wish be connected with the camera by a PC Sync cable.
Specification:
#Channel:15 different channels and all channels
#Release:Half-way press, full-way press
#Receiver Port:PC Sync, 2.5mm for shutter release
#Time of shooting:Up to 20000 times
#Receiver stand-by time:Up to 45 hours (using AAA batteries)
Compatible Flashes:
#Suitable for Cameras:
N1---Nikon: D3X/D3/D700/D300/D2X/D2H/D200/D1H/D1X /D80/D70S/D90
#Nearly all flashes with a standard hot shoe and being released by the middle contact are compatible
#Please note that the RF-603 only supports the manual flash mode, not TTL, but it works with TTL flashes
#Supports the "sleep mode" or "wake up" mode
#Canon 580EX II, 580EX, 540EZ, 520EZ, 430EZ, 430EX, 420EX, 420EZ, 380EX
#Nikon SB-900, SB-800, SB-28, SB-27, SB-26, SB-25, SB-24
#Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT
#Sigma EF-500 DG Super, EF-500 DG ST, EF-430
#Yongnuo YN460, YN462, YN465, YN467, YN468, YN560
#Not compatible to Sony/Minolta flashes
package content:
1x Transceivers
1 x Transmitter
Connects the RF-603 transceiver to your camera to work as a wireless shutter release control to trigger your camera. Compatible with Canon Rebel 300D/350D/400D/450D/500D/550D/1000D Series. Includes (1) C1 shutter release cord. Transceivers NOT included
The brand new RF-603 is a remote shutter release as well as a multi-functional radio flash trigger which can synchronously trigger flashes and studio strobes.
Through the transceiver based system each item can be used flexibly as trigger or receiver.
Only 2 AAA batteries are required as power source for each item.
The 2.4GHz wireless frequency is suitable in most countries and guarantees high speed, distance and stability.
Within capacious areas, the remote control distance may reach to 100m.
The synchronization speed can reach to 1/320, depending on the situation it may reach to 1/250 or less.
A set consist of 2 equal transceivers. Both of them can be a receiver as well as transmitter.
It can trigger 1 flash with one set, since one serves as trigger and one as receiver.
You can also buy additional transceivers to trigger 2 or more flashes at the same time.
Includes (1) RF-603 receiver (2) C3 shutter release cord
The brand new RF-603 is a remote shutter release as well as a multi-functional radio flash trigger which can synchronously trigger flashes and studio strobes.
Through the transceiver based system each item can be used flexibly as trigger or receiver.
Only 2 AAA batteries are required as power source for each item.
The 2.4GHz wireless frequency is suitable in most countries and guarantees high speed, distance and stability.
Within capacious areas, the remote control distance may reach to 100m.
The synchronization speed can reach to 1/320, depending on the situation it may reach to 1/250 or less.
A set consist of 2 equal transceivers. Both of them can be a receiver as well as transmitter.
It can trigger 1 flash with one set, since one serves as trigger and one as receiver. You can also buy additional transceivers to trigger 2 or more flashes at the same time. Includes (2) RF-603 transeivers (1) C3 shutter release cord
Yongnuo LS-PC635 PC Sync Cable 3.5mm 6.35mm Studio Strobe for RF-603
This cable connects the PC sync socket of a Yongnuo RF-603 trigger with studio strobes equipped with 6.35mm (1/4") or 3.5mm (1/8") sockets. It is approximately 30-90cm long. The PC sync plug fits all sockets with screw lock.
Suitable for : Yongnuo RF-603, PT-04 TM wireless flash trigger Any studio strobes equipped with 6.35mm (1/4") or 3.5mm (1/8") sockets -Using this Studio Flash Sync Cable with RF-603/PT-04, Used for wireless synchronous trigger for the Studio Flash(es). It is a good cable for studio photography. Package include: 1 x PC to 6.35mm connecting cable 1 x 6.35mm to 3.5mm adapter
We will ship within 2 business day of receiving cleared payment. Shipment is directly send via registered mail, it usually takes 7-20 business days.
Package includes: DSLRKIT Flash PC Sync Splitter Cord x1
Specification:
* Color: Black
*Type: FSK 2.4GHz wireless flash receiver
*Range: >60M(open environment)
*Channels: 16 channels
*Sync socket: PC sync terminal
*Max sync speed: 1/250s
*Power source: 110-230V AC 50/60Hz
*Product size: 75 * 50 * 35mm
package content :
1 x RF-603AC Receiver
1 x PC-6.35mm Sync cable
1 x 6.35mm-3.5mm Adapter
1 x Starp lanyard
Like the bracket Shoe Mount, but without a bracket-locating pin. The Universal Shoe Mount is a special version supplied with a 1/4"-20 knob for general purpose photo applications. It mounts to light stands or flat surfaces, can be used to upgrade non-Stroboframe flash brackets or mounted on the flash arm of many of our brackets to provide a convenient way of attaching shoe-mount accessories such as remote flash triggers.
Compatible cameras
Nikon?F6, F5, F90, F90X, F100, D1, D1H, D1X, D2, D2H, D2X, D3, D3X, D100, D200, D300, D700, D300S
Keda: DSC-14N
Fuji?S3Pro S5pro
Package Content
2 x Transceivers (usable as 1 x Transmitter and 1 x Receiver or 2 x Receivers)
1 x Shutter release cable N1
1 x User manual in Chinese and English
